. Remove the engine cover.

 Zoom and Print Options
26_fm94sm316_0112b-006.png



  2. Pull out and remove the instrument panel ash receptacle.
  3. Remove three screws retaining the ash receptacle drawer retainer and remove the drawer retainer.
  4. Remove center and left-hand snap-in moulding on each side of the steering column.
  5. Remove the cigar lighter knob and element.

 Zoom and Print Options
27_fm94sm316_0112b-007a.png



  6. Remove headlamp switch knob and shaft and unscrew the bezel.
     ^  To remove headlamp knob from shaft, insert a hooked tool into knob slot to depress spring. Then pull off shaft.

 Zoom and Print Options
29_fm94sm316_0112b-008.png



  7. Remove five screws and steering column opening cover.

 Zoom and Print Options
28_fm94sm316_0112b-007b.png



  9. Remove two screws retaining instrument panel finish panel.
 10. Pull instrument panel finish panel away from the instrument panel by unsnapping the snap-in retainers and disconnect all connectors to main wiring from the instrument panel finish panel.

INSTALLATION 
  1. For Installation, follow removal procedures in reverse order.